920 mildew-proof covering base primer

Suitable for wall bases: covering, moisture-proof, alkali-proof, mildew-proof, curing, sealing                  

        This product is developed with water-based high-tech materials, and deionized water (pure water) is produced throughout the process, which is clean and environmentally friendly. Effectively prevent moisture and alkaline substances from seeping out of the construction base surface, and avoid damage to wall decoration materials such as dampness, mildew, blackening, and discoloration. It is a functional anti-mildew product specially made to cover the original background color or stains on the wall.

Usage and purpose:

(1) Moisture proof and anti-mildew on the base surface of wallpaper, wall covering, and decorative boards - this product is a base surface protection treatment material that can be used for wallpaper, wall coverings, and high-grade decorative boards, and can effectively prevent the base surface of the construction Moisture and alkaline substances seep out, spray or brush one or two coats on the construction base surface, and then lay wallpaper, wall covering, plywood, etc.

(2) Moisture-proof interior walls, moisture-proof floors in bathrooms and kitchens - eradicate mildew, soft crusts to the base, and smooth them with waterproof mortar. If it is a new ordinary mortar wall and floor, it should be sprayed and brushed with this product twice. After the above treatment, the bathroom and kitchen are paved with face bricks and bottom bricks, which can effectively prevent water seepage and moisture insulation.

(3) Moisture insulation for wooden floors on concrete floors——When the concrete floors are dry, spray and brush this product twice after nailing the wooden joists, which can cut off the capillary pipes that go up from the groundwater and effectively prevent the floor from being invaded by moisture.

Construction and dosage:

According to the water absorption rate of the wall and the construction surface environment, the water mixing ratio is 1:0.1-0.2, and it can be applied after being fully stirred. Do not over-dilute, and the best effect is not to mix water. The construction area per liter is about 10-15m².

Construction is prohibited when the temperature is lower than 5°C.       

Storage conditions: 0-40 ℃, put in a dry room.